HOME > Business Wire > Article


June 29, 2020 06:00 UTC

5G and Beyond: Kyoto Semiconductor’s KP-H High-speed Photodiode With Lens-integrated Chip-on-carrier Achieves Bandwidth of 40GHz

KP-H KPDEH12L-CC1C with 400Gbps transmission speed will begin mass production in November, 2020

TOKYO--(BUSINESS WIRE)-- Kyoto Semiconductor Co., Ltd. (headquartered in Kyoto, Japan) has developed a high-speed photodiode KP-H KPDEH12L-CC1C to support 400Gbps transmission systems that use PAM4 (Pulse Amplitude Modulation 4) inside and between data centers. With the introduction of this InGaAs photodiode, the company is continually supporting the increasing speeds and capacity requirements for transmission systems in 5G networks and beyond. Mass production will start in November, 2020.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20200628005047/en/

KP-H High-speed Photodiode KPDEH12L-CC1C (Graphic: Business Wire)

KP-H High-speed Photodiode KPDEH12L-CC1C (Graphic: Business Wire)

KP-H KPDEH12L-CC1C main features

(1) High-speed
The size of the carrier on which the PD is mounted, and the width and length of the high frequency electrode pattern placed on the carrier are optimized using an electromagnetic simulation (Note 2). As a result, we have achieved the world’s top class 400Gbps and 40GHz as a frequency band with an integrated transimpedance amplifier. The KP-H photodiode has passed Telcordia GR-468-Core, which is the standard reliability test for communication equipment.

(2) Easy implementation
KPDEH12L-CC1C is mounted on a carrier that is optimally designed to achieve high frequency. A condenser lens is integrated on the backside of the photodiode (Note 3), allowing the incoming light to collect in the light absorption area, and makes it easy to align the optical fiber with PD. The PD chip is mounted on a carrier twice as big as the chip itself.

Background of development
Currently, we have achieved transmission speeds of mainly 100Gbps by bundling 4 lanes of 25Gbps. However, there are growing demands in the market for 400Gps to 800Gbps transmission speeds. The Institute of Electrical and Electronics Engineers (IEEE) set the standard of PAM4 that corresponds with 4-bit signal to one modulation. The transmission speed per PD reaches 50Gps (= 400Gps/4 lanes/2 (PAM4)). The transmission bandwidth required for the PD to achieve this speed will be 35~40GHz.

See the following for more information. https://www.kyosemi.co.jp/en/lp/kpdeh12l-cc1c

About Kyoto Semiconductor
Kyoto Semiconductor was established in 1980 in Kyoto as a dedicated manufacturer of semiconductors. The semiconductors manufactured offer superlative performance and precision, suited for use in optical transmission. They are manufactured end-to-end, including pre- and post-processing, and together with Kyoto Semiconductor’s unique packaging technology, at our location in Japan and made available to customers around the world. Kyoto Semiconductor leads the industry with world-standard technologies for optical device solutions based on Japanese quality and attention to production detail.

Notes
1) 4- level modulation method 8PAM 4 (Pulse Amplitude Modulation 4)
Instead of mounting 2-bit information {0, 1} for one modulation, the method mounts 4-bit information {0, 1, 2, 3}. This method allows transmission of twice as much information as conventional method.
2) Carrier
The patterns with little attenuation in the high-frequency are formulated on the surface of the board on which the PD is mounted. The dimension of the carrier is 0.6 x 0.48 x 0.25 t mm.
3) Condenser lens
The figure shows a schematic view of the PD chip. A condenser lens is built into the surface where the light enters, and is focused and collected on a small light absorption layer.

© 2020 Kyoto Semiconductor, Co Ltd. All rights reserved. Information in this press release, including product pricing and specifications, content of services, and contact information is current and believed to be accurate on the date of the announcement, but is subject to change without prior notice. Technical and application information contained here is subject to the most recent applicable Kyoto Semiconductor product specifications.

Contacts

Kyoto Semiconductor Co., Ltd.
Naoko Kodama, Media Relations
Tel: +81-3-5312-5361
Email:  media_relation@kyosemi.co.jp


Source: Kyoto Semiconductor Co., Ltd.

Smart Multimedia Gallery

Photo

KP-H High-speed Photodiode KPDEH12L-CC1C (Graphic: Business Wire)

Photo

Note 1) 4- level modulation method 8PAM 4 (Pulse Amplitude Modulation 4) (Graphic: Business Wire)

Photo

Note 2) Carrier (Graphic: Business Wire)

Photo

Note 3) Condenser lens (Graphic: Business Wire)

Logo

View this news release and multimedia online at:
http://www.businesswire.com/news/home/20200628005047/en


The content of this press release is provided by Business Wire. If you
have any questions regarding the content, please contact the person(s)
identified in the CONTACTS box at the bottom of the release.

Business Wire


Aomori Tourism Information

HEADLINES

POLITICS
Toyama Governor Race to Kick Off on Oct. 8 for Voting on Oct. 25
ECONOMY
Tokyo Area Condo Supply in 2020 1st Half Drops 44% to Record Low of 7,497 Units
SPORTS
Gymnastics Women: Teramoto Steadily Recovering from Achilles Tendon Rupture
OTHER
Haneko Takayama, Haruka Tono Each Win Akutagawa Prize, Seishu Hase Naoki Prize

Aomori Tourism Information

AFP-JIJI PRESS NEWS JOURNAL


Photos

Page Top